Cummins KTAA19-G5 60Hz
Cummins KTAA19-G5 60Hz – Original from Chongqing Cummins Engine Plant (CCEC), Cummins Joint Venture Plant, 50% shareholding by Cummins USA, original genuine Cummins generator engine.
Our large wholesale of CCEC Cummins generator engine brings competitive agent price for Cummins KTAA19-G5 60Hz. Our diesel generator factory manufacture Cummins generator set with high quality & fast delivery.
Cummins KTAA19-G5 Agent Wholesale Price & Cummins parts wholesaler
Worldwide Shipping
Verified Certificates
15 Working Days
Cummins KTAA19-G5 60Hz
PRIME POWER : 533 kW/714 HP @1800rpm
STANDBY POWER : 605 kW/811 HP @1800rpm
PACKING DETAILS
Dimension : 1500 * 1000 * 1400 mm,
G.W : 2100 KG
LEAD TIME : Around 15-30 Business Days
Rugged 4-cycle industrial diesel delivers reliable power, low emissions and fast response to load changes.
Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings; low waveform distortion with non-linear loads, fault clearing short- circuits capability, and class H insulation.
Offers enhanced motor starting and fault clearing short circuit capability.
Standard PowerCommand® electronic control provides total system integration including remote start/stop, precise frequency and voltage regulation, alarm and status message display, AmpSentry protection, output metering, auto-shutdown.
Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.
Optional weather-protective and sound- attenuated enclosures are available.
Further Information - Cummins KTAA19-G5 60Hz
GENERAL INFORMATION – Cummins KTAA19-G5 60Hz | ||||||||
Engine Model | Cummins KTAA19-G5 60Hz | |||||||
Engine Type | 6 Cylinders, in Line | |||||||
Displacement | 18.9 L | |||||||
Bore * Stroke | 159 * 159 | |||||||
Net Weight | 1977 Kg | |||||||
Overall Dimension | 1324mm*835mm*1183m | |||||||
Manufacture Plant | Chongqing Cummins Plant |
PERFORMANCE DATA – Cummins KTAA19-G5 60Hz | ||||||||
Prime Power | 533 kW/714 HP @1800rpm | |||||||
Standby Power | 605 kW/811 HP @1800rpm | |||||||
Torque | N.A | |||||||
Idle Speed | @675-775RPM | |||||||
Fuel Consumption | 134 L/Kw.h |
TECHNICAL SPECIFICATION – Cummins KTAA19-G5 60Hz | ||||||||
Aspiration | Turbocharged/Charge Air Cooled | |||||||
Fuel System | Cummins PT Pump, Direct Injection | |||||||
Governor Type | Mechanical Control | |||||||
Compression Ratio | 13.5:1 | |||||||
Electrical System (Starter Motor/Alternator) | 24V | |||||||
Lowest Starting Temp Without auxiliary system | -12℃ | |||||||
Engine Exhaust Manifold | Wet Exhaust manifold | |||||||
Cooling Method | Water Cooled |
COOLING SYSTEM: Coolant Capacity — Engine Only — US gal (liter) 8.0 (30) / with HX 4073 Heat Exchanger — US gal (liter) 17.5 (66) | Maximum Coolant Friction Head External to Engine — 1800 rpm — psi (kPa) 10 (69) / 1500 rpm — psi (kPa) 8 (55) | Maximum Static Head of Coolant Above Engine Crank Centerline — ft (m) 60 (18.3) | Standard Thermostat (Modulating) Range — °F (°C) 180 – 200 (82 – 93) | Minimum Pressure Cap — psi (kPa) 10 (69) | Maximum Top Tank Temperature for Standby / Prime Power — °F (°C) 220 / 212 (104 / 100) | Minimum Raw Water Flow @ 90°F to HX 4073 Heat Exchanger
— US gpm (liter / min) 54 (204) | Maximum Raw Water Inlet Pressure at HX 4073 Heat Exchanger — psi (kPa) 50 (345) || LUBRICATION SYSTEM: Oil Pressure @ Idle Speed — psi (kPa) 20 (138) / @ Governed Speed — psi (kPa) 50 – 70 (345 – 483) | Maximum Oil Temperature — °F (°C) 250 (121) | Oil Capacity with OP 4019 Oil Pan : High – Low — US gal (liter) 10.0 – 8.5 (38 – 32) | Total System Capacity (Including Bypass Filter) — US gal (liter) 13.2 (50) | Angularity of OP 4019 Oil Pan — Front Down 30° / — Front Up 30° / — Side to Side 30°
KTA19-G Series
Engine Model | Prime Power | Standby Power | Fuel System | Aspiration |
KTA19-G2 | 336KW @1500RPM | 369KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G2 (60Hz) | 392KW @1800RPM | 448KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G3 | 403KW @1500RPM | 448KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G3 (60Hz) | 463KW @1800RPM | 511KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G3A | 448KW @1500RPM | 504KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G3A (60Hz) | 507KW @1800RPM | 563KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G4 | 448KW @1500RPM | 504KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTA19-G4 (60Hz) | 507KW @1800RPM | 563KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Aftercooled |
KTAA19-G5 | 470KW @1500RPM | 555KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G5 (60Hz) | 533KW @1800RPM | 605KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G6 | Standby Output | 570KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G6 (60Hz) | Standby Output | 620KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G6A | Standby Output | 610KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G6A (60Hz) | Standby Output | 664KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G7 | Standby Output | 610KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G7 (60Hz) | Standby Output | 664KW @1800RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
KTAA19-G8 | Standby Output | 575KW @1500RPM | Cummins PT Pump, Direct Injection | Turbocharged/Charge Air Cooled |
QSKTAA19-G3 | 574KW @1500RPM 608KW @1800RPM | 634KW @1500RPM 669KW @1800RPM | Cummins MCRS | Turbocharged/Charge Air Cooled |